|
|
Improvement Power Parameter of Small Induction Motors
Halfar, Tomáš ; Ondrůšek, Čestmír (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.
|
|
|
Calculation of induction machine stray looses
Jirásek, Tomáš ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle additional losses in an electric rotary machines and a calculation of these losses for induction machine. The additional losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage.
|
|
|
Possibilities of improving efficiency of high-speed electrical machine
Nevrzal, Filip ; Mach, Martin (referee) ; Klíma, Jiří (advisor)
First part of this bachelor´s thesis briefly presents basic construction and principle of induction machine, distribution and description of individual losses. In the next part, there is a close look at the measurement of given machine. Next, there is a description of making a model in RMxprt and subsequent comparison of simulated data and characteristics to measured data. Last part describes and compares proposed changes of this motor simulated in RMxprt.
|
|
|
Stray losses calculation of induction machine
Jirásek, Tomáš ; Hájek, Vítězslav (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle stray losses in induction machine and creation calculation program in MATLAB. The stray losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage. Value of stray losses are different of engine construction especially by it are scoring insulated, uninsulated, straight or slant.
|
|
|
Analysis of core loss of a small induction machine
Plíšek, Oldřich ; Cipín, Radoslav (referee) ; Mach, Martin (advisor)
The aim of this master´s thesis is to analyze core losses of a small induction motor. Analyzed values are obtained from laboratory measurements, software analysis and 2D finite element method simulation. The theoretical part of this thesis consists of two parts. The analysis of the higher spatial harmonics presents in the induction motor and the analysis of core losses of the motor. Practical part consists of laboratory measurements according to ČSN. Measured values are used to calculate individual losses. The next part consists of creating a model for software analysis (Maxwell RMxprt). The generated model is converted into a 2D simulation environment (Maxwell 2D), where it is adapted to obtain values from the examined parts (rotor and stator teeth and rotor cage). Results of simulations at different loads are compared and analyzed from the point of view of higher harmonics.
|
|
|
Induction motor powered from inverter
Fiala, Petr ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
This master’s thesis studies additional losses generated in the induction motor powered from inverter. The first chapter was used for literature search and it mentions valuable publications. The second chapter discusses the different types of losses in the induction motor. The third chapter describes other negative effects on motor caused by inverter, the fourth one defines possible measuring methods, which would lead to the quantification of additional losses. The fifth chapter introduces the electromotor tested as well as the measuring instruments used. The last chapter presents pivotal results of the measurement in the testing room.
|
|
|
Analysis of possibilities to improvement induction motors efficiency
Novotný, Jiří ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
In the first part of the master’s thesis dealing with the increasing efficiency of induction motors there are briefly presented basic information about induction motors, followed by an overview of the losses of induction motors. The next part deals with the ways to increase efficiency of induction motors without increasing tooling costs. The practical part consists of four measurements of four induction motors, with their various mechanical adjustments to make comparing benefits of these modifications possible. The measured results are compared by a finite element method in Maxwell 2D Design program, in which the same motors are simulated as measured. Theoretical knowledge about the increase of efficiency is practically applied while being implemented in the simulations.
|
|
|
Analysis of core loss of a small induction machine
Plíšek, Oldřich ; Cipín, Radoslav (referee) ; Mach, Martin (advisor)
The aim of this master´s thesis is to analyze core losses of a small induction motor. Analyzed values are obtained from laboratory measurements, software analysis and 2D finite element method simulation. The theoretical part of this thesis consists of two parts. The analysis of the higher spatial harmonics presents in the induction motor and the analysis of core losses of the motor. Practical part consists of laboratory measurements according to ČSN. Measured values are used to calculate individual losses. The next part consists of creating a model for software analysis (Maxwell RMxprt). The generated model is converted into a 2D simulation environment (Maxwell 2D), where it is adapted to obtain values from the examined parts (rotor and stator teeth and rotor cage). Results of simulations at different loads are compared and analyzed from the point of view of higher harmonics.
|
|
|
Possibilities of improving efficiency of high-speed electrical machine
Nevrzal, Filip ; Mach, Martin (referee) ; Klíma, Jiří (advisor)
First part of this bachelor´s thesis briefly presents basic construction and principle of induction machine, distribution and description of individual losses. In the next part, there is a close look at the measurement of given machine. Next, there is a description of making a model in RMxprt and subsequent comparison of simulated data and characteristics to measured data. Last part describes and compares proposed changes of this motor simulated in RMxprt.
|
|
|
Induction motor powered from inverter
Fiala, Petr ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
This master’s thesis studies additional losses generated in the induction motor powered from inverter. The first chapter was used for literature search and it mentions valuable publications. The second chapter discusses the different types of losses in the induction motor. The third chapter describes other negative effects on motor caused by inverter, the fourth one defines possible measuring methods, which would lead to the quantification of additional losses. The fifth chapter introduces the electromotor tested as well as the measuring instruments used. The last chapter presents pivotal results of the measurement in the testing room.
|
guest ::
